Translate this page Incoloy Alloy 800 800h 800Ht / , , 1.4958/1.4959 - UNS N08810/N08811 - Alloy 800H/HT - The chemical composition of the two alloys are identical to Alloy 800 (UNS N08800), with the exception of the higher level of carbon present in both grades (0.05 0.10%) in alloy 800H, and (0.06 0.10%) in alloy 800HT. Alloy 800HT also has an addition of up 1.0 % aluminum and titanium.
Incoloy alloy 800 is a widely used material of construction for equipment that must have high strength and resist carburization,oxidation and other harmful effects of high-temperature exposure. (For high temperature applications requiring optimum rupture and creep ATI 800/ATI 800H/ATI 800ATATI 800, ATI 800H and ATI 800AT alloys are identical except for the higher level of carbon (0.05 to 0.10 percent) in the ATI 800H alloy, and the addition of up to 1.00 percent aluminum + titanium in the ATI 800 AT alloy. The ATI 800 alloy is normally used in service at temperatures to approximately 1100°F (593°C). The ATI 800H and ATI 800 AT alloys are normally used above approximately Difference Between Inconel 800 and Incoloy 800Incoloy 800 is mainly in demand by applications with temperatures up to 1100° F, where alloys 800H and 800HT are normally used in temperatures above 1100° F where resistance to creep and rupture is required. The chemical balance allows the nickel steel alloy to exhibit excellent resistance to carburization, oxidation and nitriding atmospheres.
Common Trade Names:Incoloy 800, Alloy 800, Ferrochronin 800, Nickelvac 800, Nicrofer 3220. INCOLOY® alloy 800 (UNS N08800, W. Nr. 1.4876) is a widely used material for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up Incoloy 800HT Welded Tube ASTM B515 PriceInconel pipe ASME SB 163 / ASTM B 407 / ASME SB 829 Incoloy 800H / 800HT / 800AT Nickel Alloy Pipe; Seamless Incoloy Alloy 825 Nickel Alloy Pipe ASTM B 163 / ASTM B 704; Chemical Resistant Incoloy Pipe Incoloy 800H ASTM B163 / ASTM B515 / ASTM B407 / ASTM B514; EN 1.4876 Incoloy Pipe, Seamless Incoloy 800 ASTM B163 / ASTM B515 Pipa Paduan Nikel 800H Incoloy® Alloy 800H ASTM B407 Translate this pagekualitas tinggi Pipa Paduan Nikel 800H Incoloy® Alloy 800H ASTM B407 ASME SB407 pabrik dari Cina, Pipa Paduan Nikel 800H Incoloy® Alloy 800H ASTM B407 ASME SB407 pasar produk, dengan kontrol kualitas yang ketat Nikel paduan pipa pabrik, menghasilkan kualitas tinggi Nikel paduan pipa Produk.
INCOLOY alloy 800HT has a restricted chemistry, within the limits of alloy 800H, and requires a heat treatment of 2100°F (1149°C) minimum. The maximum allowable stresses for INCOLOY alloy 800HT (UNS N08811) are contained in ASME Code Case 1987 – latest revision.ALLOY 800/800AT/800H TECHNICAL DATA - High Temp MetalsDescription. Alloy 800 is an iron-nickel-chromium alloy with moderate strength and good resistance to oxidation and carburization at elevated temperatures. It is particularly useful for high-temperature equipment in the petrochemical industry because the alloy doesn't form the embrittling sigma phase after long time exposure at 1200°F (649°C).